PS3Key Operation Manual

Requirements

• PS3 Console (fat or slim)
• Consule (firmware) version 3.41 only
• Remove all discs from the drive
• Do not connect any devices to the console via USB
• IMPORTANT: The console must be completely switched off before using PS3Key. For fat versions, use the switch at the rear. For slim versions, simply remove the power cable. This is extremely important for the process to work correctly when you start the console.

Operation

Once the power to your console is completely disconnected:

• Insert PS3Key into a USB port on the PS3.
• Start up the PS3 and press the EJECT button.
• The LED (which should have been red initially) will change to blue.
• If the above process worked, there will be a link to “Install Package File” in the game menu.

Installing the Backup Manager

You only need to install the backup manager once, using the following instructions:

• Download and add the .pkg file to a USB flash drive using your PC.
• Connect the USB flash drive to your PS3 and then go to the game menu, followed by “Install Package File” and select the .pkg file.
• Once it is installed, you will see the Backup Manager directly in the Game Menu.